Philips FW-D5/21, Руководство по обслуживанию

Страница: 20 / 100

PCS 103 811
2-14
33
English
Disc Change
You can change the outer two discs while
the third inner disc is stopped or is playing.
1 Press DISC CHANGE .
™
The CD carousel tray slides out.
2 Replace the discs in the left and right
disc trays.
• If you wish to change the inner disc
during playback, press DISC CHANGE
again.
™
"
DISC CHANGE
" will be displayed.
™
The CD will stop playing.
™
The CD carousel tray will close to
retrieve the inner CD then open again
with the inner CD accessible.
3 Press OPEN•CLOSE to close the CD
carousel tray.
Selecting a desired track
Selecting a desired track when
playback is stopped
1
Press
í
or
ë
(or Digit 0-9 on the
remote control) until the desired track
appears on the display.
2 Press
2
(PLAY) to start playback.
™
The selected track number and
elapsed playing time appear on the
display.
Selecting a desired track during
playback
• Press
í
or
ë
(or Digit 0-9 on the
remote control) until the desired track
appears on the display.
™
The selected track number and
elapsed playing time appear on the
display.
• If you press
í
once it will skip to the
beginning of the current track and play
the track again.
Note:
– Pressing
í
during shuffling can only
skip to the beginning of the current
track.
Searching for a particular
passage during playback
• Press and hold
à
or
á
until the
desired passage is located.
™
The volume will be reduced.
• Play returns to normal when
à
or
á
is released.
CD
Programming Tracks
Programming tracks of a loaded CD is
possible when playback is stopped. The
display will indicate the total tracks stored
in the programme. Up to 40 tracks can be
stored in the memory in any order. When
40 tracks are stored and you attempt to
store another track, the display will show
"
PROGRAM FULL
".
1 Load the desired discs in the disc trays.
2 Press PROG to start programming.
™
The
PROG
starts flashing.
3 Press the CD (CD 1•2•3) or CD 1/2/3
button to select the disc.
4 Press
í
or
ë
(or Digit 0-9 on the
remote control) to select the desired
track.
5 Press PROG to store the track.
• Repeat steps
3
to
5
to store other discs
and tracks.
6 Press
Ç
once to end programming.
™
The total number of tracks
programmed and total playing time
appear on the display.
Notes:
– If the total playing time is more than
"
99:59
" or if one of the programmed
tracks has a number greater than 30,
then "
--:--
" appears on the display
instead of the total playing time.
– If the system is reading the disc,
programming is not possible,
"
READING
" will be displayed and
followed by "
DISC X
" "
X
" is the
current read disc number.
– During programming, if no button is
pressed within 20 seconds, the system
will exit programme mode
automatically.
Reviewing the programme
Reviewing of the programme is possible
only when playback is stopped.
1 Press
í
or
ë
repeatedly to review
the programmed tracks.
2 Press
Ç
once to exit review mode.
Playing the programme
1 Press
2
(PLAY) to start programme
playback.
™
"
PLAY PROGRAM
" will be
displayed.
™
The track number and elapsed
playing time of the current track will
appear on the display.
• If you press REPEAT during programme
playback, the current track or all
programmed tracks will be played
repeatedly.
™
"
TRACK
" or "
PROGRAM
" will be
displayed.
™
The
REPEAT
and
PROG
appear on the
display.
34
English
CD
2 Press
Ç
to stop programme playback.
Notes:
– If you press any of the CD DIRECT PLAY
buttons, the system will play the
selected disc or track and the stored
programme will be ignored temporarily.
The
PROG
display also will disappear
temporarily from the display. It will
reappear when playback of the selected
disc ends.
– REPEAT DISC mode is not available
when programme playback begins.
Erasing the programme
(when
playback is stopped)
• Press
Ç
.
™
"
PROGRAM CLEARED
" will be
displayed.
Note:
– The programme will be erased when the
system is disconnected from the power
supply or when the CD carousel tray is
opened.
Shuffle
(only on remote control)
In shuffle mode, the system plays all the
available discs and their tracks in random
order. Shuffle may be used also when
tracks are programmed.
To shuffle all the discs and tracks
1
Press SHUFFLE .
™
"
SHUFFLE
" will be displayed.
™
The
SHUFFLE
, the disc and the track
selected at random appear on the
display.
• The discs and the tracks will be played
in random order until you press
Ç
.
• If you press REPEAT during shuffling,
the current track or all available discs
will be played repeatedly.
™
"
TRACK
" or "
ALL DISC
" will be
displayed.
™
The
REPEAT
and
SHUFFLE
appear on the
display.
2 Press SHUFFLE again to resume normal
playback.
™
The
SHUFFLE
disappears from the
display.
Note:
– REPEAT DISC mode is not available
when shuffle is selected.
Repeat
(only on remote control)
You can play the current track, a disc or all
available discs repeatedly.
1 Press REPEAT on the remote control to
select the various repeat modes.
™
"
TRACK
", "
DISC
", "
ALL DISC
" or
"
OFF
" will be displayed.
™
The
REPEAT
appears on the display.
• The selected track, selected disc or all
available discs will now be played
repeatedly until you press
Ç
.
2 Press REPEAT until the "
OFF
" mode is
displayed to resume normal playback.
™
The
REPEAT
disappears from the
display.
Notes:
– REPEAT DISC mode is not available
during programme play or shuffle mode.
– You can also repeat shuffling a
programme.
™
"
TRACK
" or "
PROGRAM
" will be
displayed.
™
The
REPEAT
,
PROG
and
SHUFFLE
appear
on the display.