Philips FW-D5/21, Руководство по обслуживанию

Страница: 26 / 100

3-2 3-2
PCS 103 817
a) Loosen 4 screws C at the bottom of the Cabinet Front as
shown below.
Figure 2
S1
Direction of
screw bit
C
C
b) Release the Bar Tuner (pos 263) from the Plate Front
(pos 254) as shown below while pushing the Front Panel
assembly towards the front.
Figure 10
1
2
Note: It may be necessary to release screws S (see
figure 16) if the flex cables to the front are too tight.
c) Loosen 5 screws J to remove the Plate Front (pos 254)
and 4 more screws K to remove the Front
µ
Processor
Board (pos 1102-A) as shown below.
Figure 11
J
K
K
d) Loosen 7 screws L to remove the Deck Key Board as
shown below.
Figure 12
L
e) Loosen 3 screws M & 6 catches C4 to remove the Front
Cover Ornamental assembly (pos 145 + all button con-
trols) as shown below.
Figure 13
M C4
C4
4. Dismantling the Front Panel Assembly
a) Loosen 6 screws D at the rear as shown below.
Figure 14
D
E
G
F
C3
C3
C2
C2
H
b) Loosen 3 screws I on the AV Board (pos 1101) and
release 2 catches C1 to remove the Board as shown
below.
Figure 15
C1
C1
I
c) Loosen 1 screw E and remove the Bar Tuner (pos 263)
by uncatching it from the Plate Front (pos 254) as shown
in fig. 10.
d) Loosen 4 screws P to remove the Mains Transformer
(pos 5280) as shown in figure 16.
5. Dismantling the AV Board / Mains Transformer / Tuner Module / Plate Rear / Power 5 DVD Module
Figure 16
P
Q
R
R
N
S
T
L1
Ground
Tag
Wire
e) Loosen 3 screws F and 2 catches C3 to remove the Tuner
Module (pos 257 & 1100) as shown in figure 14
f) Loosen 3 screws H, 2 screws G and releasing 2 catches
C2 (see figure 14), it is also possible to remove the Plate
Rear (pos 234) and Tuner Module together by skipping
step e).
g) Loosen 1 screw N to release the grounding tag wire and
the Power 5 Module can be removed by pulling out of the
2 catches H1 (see figure 17).