Philips Divar, Руководство по установке

Страница: 18 / 74

Quick install
2-6 Philips Communication, Security & Imaging
>> Enable motion for
• Select the profiles during which motion events are enabled Choose day,
weekend/night, both day and weekend/night or none.
• Press the camera keys to select or deselect the cameras for which motion
should be enabled. A check mark means enabled.
>> Motion recording
• A camera can be recorded at an increased recording speed when motion is
detected. Select the recording speed to be used for each of the cameras
when motion is detected.
>> Approximate recording duration
• This is an estimate of the recording duration based on the total amount of
storage space available and the recording setup. For event recording, the
following parameters are used:
- During the day, one camera is in input alarm recording 5% of the
time and every motion enabled camera is in motion recording 10% of
the time.
- During the night and weekend, one camera is in input alarm
recording 1% of the time and in motion recording for 3% of the time.
>> Network settings
>> DHCP
• Set DHCP to Yes to have IP address, subnet mask and default gateway
assigned automatically by the network server. The actual values are
displayed.
>> DVR name
• Enter a Divar name to be used in the network.
>> IP address, Subnet mask and Default gateway
• Fill in the IP, subnet mask and default gateway addresses when DHCP is
set to No.
>> MAC address
• The MAC address is read only.
>> Bandwidth limit
• Restrict the network bandwidth by entering an MBPS between 0 and 100
for the bandwidth limit.
NETWORK SETTINGS
DHCP NO
DVR NAME DIVAR
IP ADDRESS 192.168. 10.2
SUBNET MASK 255.255.255. 0
DEFAULT GATEWAY 0. 0. 0. 0
MAC ADDRESS 00:00:00:00:00:00
BANDWIDTH LIMIT 100 MBPS