Philco PDI 1568 DLT, Руководство пользователя

Страница: 9 / 128

Copyright © 2020, Fast ČR, a. s. Revision 03/2022
EN - 7
To remove the top panel, remove the screws that
hold it on, located at the rear of the machine. Then,
push the panel 1 cm from the front towards the rear
and lift it. Adjust the machine feet according to the
slope of the floor (3) .
Fit your machine by pushing it under the counter
taking care not to crush or bend the hoses (4) .
WARNING!
After removing the top panel of your
dishwasher, the machine should be placed
in a space of the dimensions shown in the
figure below.
+PLQ$
+PLQ%
+PLQ%
A B
All
Products
B
1
B
2
Product’s
Height (±2
mm)
820 mm 830 mm 835 mm
A:
If there is no felt on the top of the product; you
should take into account this product’s height.
B1:
If there is felt on the top of the product with 2nd
basket; you should take into account this product’s
height.
B2: If there is felt on the top of the product with 3rd
basket; you should take into account this product’s
height.