Philco PDI 1568 DLT, Руководство пользователя, Страница: 8 / 128

Copyright © 2020, Fast ČR, a. s. Revision 03/2022
EN - 6
CAUTION!
Ensure the water inlet and outlet hoses
are not squeezed or trapped and that the
machine does not stand on the electrical
cable while positioning.
Drain Hose
Connect the water drain hose directly to water drain
hole or to the sink outlet spigot. This connection
should be minimum 50 cm and maximum 110 cm
from flor plane.
IMPORTANT:
Items will not wash properly if a drain hose
longer than 4 m is used.
Electrical connection
WARNING!
Your machine is set to operate at 220-240 V.
If the mains voltage supply to your machine
is 110 V, connect a transformer of 110/220
V and 3000 W between the electrical
connection.
Connect the product to a grounded outlet
protected by a fuse complying with the
values in the “Technical Specifications”
table”.
The earthed plug of the machine must be
connected to an earthed outlet supplied
by suitable voltage and current.
In the absence of earthing installation, an
authorised electrician should carry out an
earthing installation. In the case of use
without earthing installed, we will not be
responsible for any loss of use that may
occur.
The plug on this appliance may
incorporate 13A fuse depending on the
target country. (For Example UK, Saudi
Arabia)
Fitting the machine undercounter
If you wish to fit your machine undercounter, there
must be sufficient space to do so and the wiring-
plumbing must be suitable to do so (1) . If the space
under the countertop is suitable for fitting your
machine, remove the worktop as shown in the
illustration (2) .
WARNING!
The countertop, of which the machine will
be placed under, must be stable in order to
prevent imbalance.
The top panel of the dishwasher must
be removed to fit the machine under the
countertop.