Philco PDI 1568 DLT, Руководство пользователя, Страница: 12 / 128

Copyright © 2020, Fast ČR, a. s. Revision 03/2022
EN - 10
Test Strip
Run water through
the tap (1min.)
Keep the strip in
the water (1sec)
Shake the strip.
Wait
(1min.)
Set the hardness
level of your
machine.
1
minute
1
second
1
minute
NOTE:
The level is set to 3 as default. If the water is well water or has a hardness level above 90 dF, we recommend
that you use filter and refinement devices.
Water Hardness Table
Level German dH French dF British dE Indicator
1 0-5 0-9 0-6 L1 is seen on the display.
2 6-11 10-20 7-14 L2 is seen on the display.
3 12-17 21-30 15-21 L3 is seen on the display.
4 18-22 31-40 22-28 L4 is seen on the display.
5 23-31 41-55 29-39 L5 is seen on the display.
6 32-50 56-90 40-63 L6 is seen on the display.
Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the mains water supply. To
find out the hardness level of your tap water, contact your water company or use the test strip (if available).
Setting
• Turn the machine on by pressing the On/Off button.
• Press the Program button for at least 3 seconds immediately after the machine is turned on.
• Release the Program button when “SL” is shown. Next, the last setting level is displayed.
• Press the program button to set the desired level. Each press of the program button increases the level.
Once level 6 has been reached, the next press returns the level to 1.
• The last selected water hardness level is stored in the memory by turning the machine off with the On/Off
button.