Philco PDI 1568 DLT, Руководство пользователя, Страница: 7 / 128

Copyright © 2020, Fast ČR, a. s. Revision 03/2022
EN - 5
PART 2: INSTALLATION
Machine positioning
When positioning the machine, place it in an area
where dishes can be easily loaded and unloaded. Do
not put the machine in an area where the ambient
temperature falls below 0 °C.
Read all warnings located on the packaging before
removing the packaging and positioning the
machine.
Place the machine close to a water tap and drain. Take
into consideration that the connections will not be
altered once the machine is in position.
Do not hold the machine by its door or panel.
Leave an adequate distance around the machine to
allow ease of movement when cleaning.
CAUTION!
Ensure the water inlet and outlet hoses
are not squeezed or trapped and that the
machine does not stand on the electrical
cable while positioning.
Adjust the feet so the machine is level and balanced.
The machine should be placed on flat ground
otherwise it will be unstable and the door of the
machine will not close properly.
Water connection
We recommend fitting a filter to your water inlet
supply in order to prevent damage to your machine
due to contamination (sand, rust, etc.) from indoor
plumbing. This will also help prevent yellowing and
deposit formation after washing.
Note printing on the water inlet hose!
If models are marked with 25°, the water temperature
may be max. 25 °C (cold water).
For all other models:
Cold water preferred; hot water max. temperature 60
°C.
Water inlet hose
WARNING!
Use the new water inlet hose supplied with
your machine, do not use an old machine’s
hose.
WARNING!
Run water through the new hose before
connecting.
WARNING!
Connect the hose directly to the water inlet
tap. The pressure supplied by the tap should
be a minimum of 0.03 MPa and a maximum
of 1 MPa. If the pressure exceeds 1 MPa, a
pressure relief valve must be fitted between
the connection.
WARNING!
After the connections are made, turn the tap
on fully and check for water leaks. Always
turn off the water inlet tap after a wash
program has finished