Philco PDI 1568 DLT, Руководство пользователя

Страница: 22 / 128

Copyright © 2020, Fast ČR, a. s. Revision 03/2022
EN - 20
NOTE:
If you switch the machine to off position after
selecting the delay time and the programme has
started, the delayed time is cancelled.
Changing a programme
If you would like to change the programme when the
machine is already running.
Press the Start/Pause
button.
After the programme stops, select
your desired programme via the
programme selection button.
Start the newly selected programme
by pressing the Start/Pause button.
The new programme will resume
the course of the old programme.
11. Extra Hygiene Option Indicator
You may select Extra Hygiene option in order to
obtain a more hygienic and a cleaner washing process
by altering the water temperature and washing time
of the programme you have selected.
12. Half Load Option Indicator
By selecting the half load option ,three sorts of
washing can be executed: both baskets, upper basket
and lower basket. These options are ideal for smaller
loads, allowing the dishwasher to perform smaller
washes with reduced consumption.
13. Extra Dry Option Indicator
If you select Extra Dry option, extra heating and drying
steps will be added into the selected programme,so
your dishes will be dried more thoroughly.
14. Extra Fast Option Indicator
Select the Extra Fast option to decrease the duration
of a programme, providing more economical water
usage.
15. Extra Silent Option Indicator
Select the Extra Silent option for a more sensitive and
silent washing operation. This option reduces the
sound pressure level of the washing.
NOTE:
If an extra option has been used on the most
recent wash programme, this option will remain
active on the newly selected programme until
the machine turns off. To cancel this option on
the newly selected wash programme, press the
Option button (6) until the light on the button
switches off.
NOTE:
Child lock is activated/deactivated by pressing the
select button (7) for about 3 seconds. When it is
activated, all leds blink and “CL” is shown on the
Remaining time indicator (4) .
NOTE:
To save any program as favourite program, press
Programs
(2)
and Delay
(3)
buttons together . To
select favourite program, press and hold Programs
button (2) for 3 sec.