Philco PDI 1568 DLT, Руководство пользователя, Страница: 11 / 128

Copyright © 2020, Fast ČR, a. s. Revision 03/2022
EN - 9
PART 4: BEFORE USING THE APPLIANCE
Preparing your dishwasher for first
use
• Make sure the electricity and supply water
specifications match the values indicated in the
installation instructions for the machine.
• Remove all packaging material inside the
machine.
• Set the water softener level.
• Fill the rinse aid compartment.
Salt usage
For a good washing function, the dishwasher needs
soft, i.e. less calcareous water. Otherwise, White lime
residues will remain on the dishes and the interior
equipment. This will negatively affect your machine’s
washing, drying and shining performance. When
water flows through the softener system, the ions
forming the hardness are removed from the water
and the water reaches the softness required to
obtain the best washing result. Depending on the
level of hardness of the inflowing water, these ions
that harden the water accumulate rapidly inside the
softener system. Therefore, the softener system has
to be refreshed so that it operates with the same
performance also during the next wash. For this
purpose, dishwasher salt is used.
Machine can only be used by special dishwasher salt
to soften the water. Do not use any small grained or
powdered type of salts which can easily soluble. Using
any other type of salt can damage your machine.
Fill the salt
To add softener salt, open the salt compartment cap
by turning it counter clockwise.
(1) (2)
At first use, fill
the compartment with 1 kg salt and water (3) until it
is almost overflowing. If available, using a funnel (4)
will make filling easier. Replace the cap and close it.
6$
/7
Only add water to the salt compartment on first
use.
Use softener salt specifically produced for use in
dishwashers.
When you start your dishwasher, the salt
compartment is filled with water, therefore put the
softener salt in prior to starting your machine.
If the softener salt has overflowed and you do not
start the machine immediately, run a short washing
program to protect your machine against corrosion.