Philco PDI 1568 DLT, Руководство пользователя, Страница: 27 / 128

Copyright © 2020, Fast ČR, a. s. Revision 03/2022
EN - 25
PART 9: TROUBLESHOOTING
FAULT POSSIBLE CAUSE TROUBLESHOOTING
The programme does
not start.
Your Dishwasher is not plugged in. Plug your Dishwasher in.
Your Dishwasher is not switched on.
Switch your Dishwasher on by pressing
the On/Off button.
Fuse blown. Check your indoor fuses.
Water inlet tap is closed. Turn on the water inlet tap.
Your Dishwasher door is open. Close the Dishwasher door.
Water inlet hose and machine filters are
clogged.
Check the water inlet hose and
machine filters and make sure they are
not clogged.
Water remains inside
the machine.
Water drain hose is clogged or twisted.
Check the drain hose, then either clean
or untwist it.
The filters are clogged. Clean the filters.
The programme is not finished yet. Wait until the programme is finished.
Machine stops during
washing.
Power failure. Check mains power.
Water inlet failure. Check water tap.
Shaking and hitting
noises are heard
during a wash
operation.
The spray arm is hitting the dishes in
the lower basket.
Move or remove items blocking the
spray arm.
Partial food wastes
remain on the dishes.
Dishes placed incorrectly, sprayed
water not reaching affected dishes.
Do not overload baskets.
Dishes leaning each another.
Place dishes as instructed in the section
on loading your dishwasher.
Not enough detergent used.
Use the correct amount of detergent, as
instructed in the programme table.
Wrong wash programme selected.
Use the information in the programme
table to select the most appropriate
programme.
Spray arms clogged with food waste.
Clean the holes in the spray arms with
thin objects.
Filters or water drain pump clogged or
filter misplaced.
Check the drain hose and filters are
correctly fitted.