Philco PDI 1568 DLT, Руководство пользователя

Страница: 28 / 128

Copyright © 2020, Fast ČR, a. s. Revision 03/2022
EN - 26
FAULT POSSIBLE CAUSE TROUBLESHOOTING
Whitish stains remains
on dishes.
Not enough detergent used.
Use the correct amount of detergent, as
instructed in the programme table.
Rinse aid dosage and/or water softener
setting set too low.
Increase rinse aid and/or water softener
level.
High water hardness level.
Increase water softener level and add
salt.
Salt compartment cap not closed
properly.
Check that the salt compartment cap is
closed properly.
Dishes do not dry
Drying option is not selected.
Select a programme with a drying
option.
Rinse aid dosage set too low. Increase rinse aid dosage setting.
Rust stains form on
the dishes.
Stainless-steel quality of the dishes is
insufficient.
Use only dishwasher-proof sets.
High level of salt in wash water.
Adjust the water hardness level using
water hardness table.
Salt compartment cap not closed
properly.
Check that the salt compartment cap is
closed properly.
Too much salt spilled in the Dishwasher
while filling it with salt.
Use funnel while filling salt to the
compartment to avoid spillage.
A poor mains grounding.
Consult a qualified electrician
immediately.
Detergent remains
in the detergent
compartment.
Detergent was added when the
detergent compartment was wet.
Make sure detergent compartment is
dry before use.