Philco PDI 1568 DLT, Руководство пользователя

Страница: 15 / 128

Copyright © 2020, Fast ČR, a. s. Revision 03/2022
EN - 13
PART 5: LOADING YOUR DISHWASHER
For best results, follow these loading guidelines.
Loading the household dishwasher up to the capacity
indicated by the manufacturer will contribute to
energy and water savings.
Manual pre-rinsing of tableware items leads to
increased water and energy consumption and is not
recommended
You can place cups, glasses, stemware, small plates,
bowls, etc. in upper basket. Do not lean long glasses
against one another or they cannot remain steady
and may receive damage.
When placing long stem glasses and goblets, lean
them against the basket edge or rack and not against
other items.
Place all containers such as cups, glasses and pots into
the dishwasher with the opening facing downwards
otherwise water can collect on items.
If there is cutlery basket in machine, you are
recommended to use the cutlery grid in order to
obtain the best result. Place all large (pots, pans, lids,
plates, bowls etc.) and very dirty items in the lower
rack.
Dishes and cutlery should not be placed above each
other.
WARNING!
Take care not to obstruct the rotation of
spray arms.
WARNING!
Make sure after loading the dishes do not
prevent opening the detergent dispenser.
Recommendations
Remove any coarse residue on dishes before placing
the dishes in the machine. Start the machine with full
load.
NOTE:
Do not overload the drawers or place dishes in the
wrong basket.
WARNING!
To avoid any possible injuries, place long-
handle and sharp- pointed knives with their
sharp points facing down or horizontally on
the baskets.
Height Adjustable Rack (peg type)
The height adjustable racks enable glasses and cups
to be placed on or under the racks. The racks can be
adjusted to 2 different heights. Cutlery and utensils
can also be placed on the racks horizontally.