EN - 37
01/2016
Copyright © 2016, Fast ČR, a. s.
Water Outlet
Connect the water drain hose. The drain hose must be correctly fi tted to avoid water leaks. Ensure that the
water inlet hose is not kinked or squashed.
Extension Hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 metres; otherwise the cleaning eff ect of the dishwasher could be reduced.
Syphon Connection
Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making
sure to avoid bending or crimping it. The top of the hose must be less than 1000mm.
Start of dishwasher
The following things should be checked before star ting the dishwasher.
1
The dishwasher is level and fi xed properly
2
The inlet valve is open
3
There is a leakage at the connect ions of the conduct s
4
The wires are tightly connected
5
The power is switched on
6
The inlet and drain hoses are knotted
7
All packing materials and printings should be taken out from the dishwasher
ATTENTION:
After installation, please make sure to keep this manual.
The content of this manual is very helpful to the users.
Содержание PD 1062 BiS
Страница 1: ...DISWASHER USER S MANUAL PD 1062 BiS...
