EN - 11
01/2016
Copyright © 2016, Fast ČR, a. s.
PART 5: PRIOR USING FOR THE FIRST TIME
Before using your dishwasher for the fi rst time:
–
Set the water softener
–
Add 1.5Kg dishwasher salt and then full fi ll the salt container with water
–
Fill the rinse aid dispenser
–
Fill in detergent
Water Softener
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which would have a detrimental
or adverse eff ect on the operation of the appliance.
The higher the content of these minerals and salts, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority
can advise you on the hardness of the water in your area.
Adjusting salt consumption
The dishwasher is designed to allow for adjustment in the amount of salt consumed based on the hardness of
the water used. This is intended to optimise and customise the level of salt consumption.
Please follow the steps below for adjustment in salt consumption
1. Close the door and switch on the appliance.
2. During the first 60 seconds after the appliance was switched on, press the start / pause button for more
than 5 seconds to start the water softener setting ( The Salt and Rinse aid warning lights will be on
periodically when it get in the set model );
3.
Press the Program button to select the proper set according to your local environment, the sets will
change in the following sequence: H1 - H2 - H3 - H4 - H5 - H6.
4.
Press the Power button to end the set up model.
Water hardness
Selector position
Salt consumption
(g/cycle)
°dH
°fH
°Clarke
mmol/l
0 ~ 5
0 ~ 9
0 ~ 6
0 ~ 0,94
Selector position
0
6-11
10-20
7-14
1,0-2,0
H2 (90 Min light bright)
9
12-17
21-30
15-21
2,1-3,0
H3 (90 Min, Rapid light bright)
12
18-22
31-40
22-28
3,1-4,0
H4 (Eco light bright)
20
23-34
41-60
29-42
4,1-6,0
H5 (Eco, Rapid light bright)
30
35-55
61-98
43-69
6,1-9,8
H6 (Eco, 90 Min light bright)
60
NOTE:
1 dH = 1,25 Clarke = 1,78 fH = 0,178 mmol/l
DH: German degree
fH: French degree
Clark: British degree
The manufactory setting: H3 (EN 50242)
Contact your local water board for information on the hardness of your water supply.
Содержание PD 1062 BiS
Страница 1: ...DISWASHER USER S MANUAL PD 1062 BiS...
