Philco PD 1062 BiS, Руководство пользователя

Страница: 27 / 44

EN - 25
01/2016 Copyright © 2016, Fast ČR, a. s.
1
Press the Start/Pause button to pause the program.
2
Open the door slightly.
3
Once the spraying arms stop, you may open the door fully.
4
Load the forgotten dishes into the dishwasher.
5
Close the door.
6
Press the Start/Pause button and the dishwasher will start within about 10 seconds.
At the end of the wash cycle
When the working cycle has fi nished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn
off the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.
Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they
are still hot and more susceptible to breakage. They will also dry better.
Switch of the dishwasher
Switch of the dishwasher
1. Open the door. Switch off the dishwasher by pressing the ON/OFF button.
2.
Turn off the water tap!
Open the door carefully
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwasher’s door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket fi rst and then the upper one. This will avoid water dripping from the upper basket onto
the dishes in the lower one.
WARNING!
It is dangerous to open the door when washing, because the hot water may scald you.