Philco PD 1062 BiS, Руководство пользователя

Страница: 30 / 44

EN - 28
01/2016 Copyright © 2016, Fast ČR, a. s.
Protect Against Freezing
Take frost protection measures on the dishwasher in winter. Every time after washing cycles, please operate
as follows:
1.
Cut off the electrical power to the dishwasher.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain the water from the inlet pipe and water valve. (Use a pan to gather the water)
4. Reconnect the water inlet pipe to the water valve.
5. Remove the fi lter at the bottom of the tub and use a sponge to soak up water in the sump.
NOTE:
If your dishwasher cannot work because of the ice, please contact professional service persons.
Cleaning the Spray Arms
It is necessary to clean the spray arms regularly for hard water
chemicals will clog the spray arm jets and bearings.
To remove the upper spray arm, hold the nut, rotate the arm
clockwise to remove it.
To remove the lower spray arm, pull out the spray arm upward.
Wash the arms in soapy and warm water and use a soft brush to
clean the jets. Replace them after rinsing them thoroughly.
How to keep your dishwasher in shape
After Every Wash
After every wash, turn off the water supply to the appliance and leave the door slightly open so that moisture
and odours are not trapped inside.
Remove the Plug
Before cleaning or performing maintenance, always remove the plug from the socket.
No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products.
Only use a cloth with warm soapy water. To remove spots or stains from the surface of the interior, use a cloth
dampened with water a little vinegar, or a cleaning product made specifi cally for dishwashers.
Open