Philco PD 1062 BiS, Руководство пользователя

Страница: 35 / 44

EN - 33
01/2016 Copyright © 2016, Fast ČR, a. s.
Tension adjustment of the door spring
The door springs are set at the factory to the proper tension for the outer door. If aesthetic wooden panel are
installed, you will have to adjust the door spring tension.
Rotate the adjusting screw to drive the adjustor to strain or relax the steel cable (see fi gure 5).
Door spring tension is correct when the door
remains horizontal in the fully opened position yet
rises to a close with the slight lift of a fi nger.
Figure 5
Tension adjustment of the door spring
Connection of drain hoses
Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making
sure to avoid bending or crimping it. The top of the hose must be less than 1000mm
Figure 6
FIX THE DRAIN HOSE EIGTHER WAY OF A, B
Counter
Drain pipe
NOTE:
he top of the hose must
be less than 1000mm.
Front