Pfeiffer Vacuum HiPace 300 P, Руководство по эксплуатации

Страница: 6 / 64

List of figures
Fig. 2: Position of the stickers on the product 8
Fig. 3: Design 300 P (example DN 100 ISO-K and DN 100 CF-F) 18
Fig. 4: Example: Safety connections 23
Fig. 5: Recommended alignment when using oil-sealed backing pumps 24
Fig. 6: Flange connection ISO-K to ISO-F, bracket screws 24
Fig. 7: Flange connection ISO-K with ISO-F, hexagon head screw and tapped hole 25
Fig. 8: Flange connection ISO-K with ISO-F, stud screw and tapped hole 25
Fig. 9: Flange connection ISO-K with ISO-F, stud screw and through hole 26
Fig. 10: Flange connection ISO-F, hexagon head screw and tapped hole 26
Fig. 11: Flange connection ISO-F, stud screw and tapped hole 26
Fig. 12: Flange connection ISO-F, stud screw and through hole 27
Fig. 13: Flange connection CF-F, hexagon head screw and through hole 27
Fig. 14: Flange connection CF-F, stud screw and tapped hole 28
Fig. 15: Flange connection CF-F, stud screw and through hole 28
Fig. 16: Example of fore-vacuum connection on HiPace 300 29
Fig. 17: Connecting the cooling water supply 31
Fig. 18: Example: Connecting the grounding cable 33
Fig. 19: Connecting the electronic drive unit to a power supply pack 34
Fig. 20: Removing the operating fluid reservoir 42
Fig. 21: Installing the operating fluid reservoir 43
Fig. 22: Removal of electronic drive unit TC 400 45
Fig. 23: Installation of electronic drive unit TC 400 45
Fig. 24: Spare parts HiPace 300 P 53
Fig. 25: HiPace 300 | TC 400 | DN 100 ISO-K 59
Fig. 26: HiPace 300 | TC 400 | DN 100 ISO-F 59
Fig. 27: HiPace 300 | TC 400 |DN 100 CF-F 59
List of figures
6/62