Adjustment
68
13
.05
Changing the bottom feed roller on the feed-off-the-arm and post version
After its removal feed roller
7
must be kept in a safe place.
Every minor damage to the roller has a negative effect on the sealing result!
Remove cover
1
(screws
2)
by inserting Allen key (SW 4)
into hole
3
and pushing off cover
1.
Lock feed roller
4
with an Allen key (SW 4)
by passing the Allen key from the right
through the hole
5
in the arm and turning feed roller
4,
until the Allen key clicks into
place.
Loosen feed roller
6
with a spanner wrench and twist it out.
Pull off feed roller
7
and keep it in a safe place.
Extract any dirt (fluff) in the feed roller area.
Place the new feed roller
7
onto the shaft and tighten the screws on feed roller
6
Remove the Allen key and replace cover
1
(screws
2).
Set the clearance of the sonotrode to feed roller
7
as described in Chapter
13.06 Feed
roller clearance
.
Check the position of the sonotrode with regard to feed roller
7
as described in Chapter
13.07 Position of the feed rollers
.
●
●
●
●
●
●
●
●
●
Fig. 13 - 02
1
2
6
4
7
5
5
3
3