manualshive.com logo in svg

Pfaff 8310-041, Инструкция по эксплуатации, Страница: 59 / 86

Поделиться
Скачать
Pfaff 8310-041 Скачать руководство пользователя страница 59

 

 

Input

 

59

11

.03.02 

Feed roller parameters

In this menu the relevant parameters for the feed rollers are preset.

Switch on the machine. 

Enter the input mode. 

Call up further settings. 

Call up the menu for entering the feed roller parameters.

●

●

●

●

Description of the functions

Input mode

This function is used to change from the initial state to the input mode.

Further settings

This function calls up the menu for entering further settings again.

Sealing mode

This function is used to change to the sealing mode.

Acceleration and brake profiles

This function is used to enter the values for the corresponding acceleration or brake profiles.

Feed roller pressure limit

This function is used to enter the maximum permissible value for the feed roller pressure.

Basic position of the top feed roller

This function is used to select the basic position of the top feed roller. The basic position of 
the feed roller can be raised or lowered.

Size of the feed difference

This function is used to stipulate the size of the feed difference of the feed rollers (only with 
the triple foot switch, which is available as an option)

Содержание 8310-041























































































Отзывы:

Нет отзывов