Input
60
Reversing the feed direction
This function is used to switch the complete reversing function of the feed direction on or
off.
11
.03.03
Rights of access
The functions, which can be called up with the control panel, are classified by code numbers
and can be protected from unauthorised access. For this purpose, the control unit differenti-
ates between
3
user groups (user
1, 2
and
3),
all of which can be assigned a corresponding
PIN. If a function is selected, for which the user does not have an authorisation, the user is
requested to enter a PIN. After the appropriate PIN has been entered, the selected function
is carried out. In addition to the
3
user groups, the control unit also recognises the so-called
"super user", who, equipped with a key-switch, has access to all functions and who is autho-
rised to stipulate the rights of access.
Enter the key-switch and switch on the machine.
Call up the input mode.
Call up further settings.
Call up the menu for entering rights of access.
●
●
●
●
Description of the functions
Input mode
This function is used to change from the initial state to the input mode.
Further settings
This function calls up the menu for entering further settings again.
Sealing mode
This function is used to change to the sealing mode.
Entering the PIN
With this function an individual PIN for each user can be stipulated.