Pfaff 3811-15/65, Инструкция по эксплуатации, Страница: 53 / 138

Input
53
In the third seam zone, a target length of 160 mm is to be used for an actual length of
190 mm.

Call the menu for entering the target/actual length of the seam zone and enter the values
for target and actual length.

Complete the entry of the target/actual length.

Change to the fourth seam zone.
In seam zone four
- it should be worked without a fullness setting,
- the end of the seam zone should be executed by the pedal function.
- the functions “trim thread” and “lift sewing foot” should be enabled.

Enter value " 0 " for the fullness.

Call up the seam zone menu.

Enable the seam zone relaying via the pedal function.

Switch on the “trim thread” function

Switch on the “presser foot up” function

Conclude the entry.

Activate "End program" function.

Complete the input of the seam program and change to the programmed sewing.