Pfaff 3811-15/65, Инструкция по эксплуатации, Страница: 49 / 138

Input
49
11
.01.05
Seam zone input during seam programming
After calling up the corresponding function, the menu for inputting the functions and values
for the end of the seam zone without stitch concentration appears.

If necessary switch off stitch concentration.

Switch the seam zone relaying using the pedal function on and off.

Switch the seam zone relaying using the knee switch on and off.

Enter or change the number of stitches for the seam zone (via numeric input or by using
the arrow keys).

Activate or deactivate automatic sewing stop at the end of the seam zone.

Activate or deactivate the "Lift sewing foot " function, see Chapter 10.01 Manual
sewing.

Activate or deactivate the "Thread trimming" function, see Chapter 10.01 Manual
sewing.

Activate or deactivate the "Needle position up" function, see Chapter 10.01 Manual
sewing.

End the input and change to programmed sewing.
Not every combination of functions is adjustable.
All activated functions are displayed inversely.