Pfaff 3811-15/65, Инструкция по эксплуатации, Страница: 119 / 138

Adjustment
119
13.09.03 List of parameters
The parameter " 100" is accessible to the operator.
Changing the parameters "200" - "800" can only be carried out after entering
the template code and may only be performed by authorised and qualifi ed per-
sonnel.
Group Param-
eter Description Setting
range Setting
range
1
102
Reverse rotation OFF - ON OFF
113 Signal tone on changing ranges OFF - ON OFF
114
Maximum speed in every forward pedal
position
OFF - ON OFF
2
201
Machine confi guration
3 = 3811-3/55
4 = 3811-15/...
5 = 3811-16/...
3 - 5 -
209 Fullness correction value (keypad)
0 - 9 0
210 Switch off the edge knife (at pedal posi-
tion “-2”)
OFF - ON OFF
212 Change the speed for fullness
OFF - ON OFF
213 Program termination at pedal position -2 OFF - ON OFF
214 Reference movement for fullness adjust-
ment after thread trimming during pro-
grammed sewing.
OFF - ON OFF
3
301
Position “needle point top edge sewing
plate”
0 – 127 0
302 Cover-thread carrier position t.d.c. 0 – 127 107
303 Needle position under 0 – 127 60
304 Reverse rotation position 0 – 127 107
305 Placed stitch position 0 – 127 7
4
401 Holdoff time “Lift presser foot “ [s] 0.01 – 1.50 0.02
402
Start inhibitor after "lower presser foot" [s] 0.01 – 1.50 0.15
403
Thread trimming time [s] 0.01 – 0.20 0.12
404
Time to clean the thread monitor [s] 0.01 - 1.50 0.25
5
501 Maximum speed 100 – 4200 4200
504 Soft start speed 100 – 4200 1500
505 Soft starting stitches 0 – 15 0