Pfaff 3811-15/65, Инструкция по эксплуатации, Страница: 51 / 138

Input
51
The fi rst seam zone should
- be worked without a fullness setting,
- the end of the seam zone should be executed by the knee switch.

Enter value " 0 " for the fullness.

Call up the seam zone menu.

Enable the seam zone relaying via the knee switch.

Complete the input of the seam zone.

Change to the second seam zone.
In the second seam zone, a target length of 140 mm is to be used for an actual length of
242 mm .

Call up the menu for entering the target/actual length of the seam zone.