Pfaff 3811-15/65, Инструкция по эксплуатации, Страница: 48 / 138

Input
48

After sewing, the following information and functions appear on the display:

Pressing the Enter key defi nes the seam zone by stitch counting.

Actuating the pedal in position “ 2 ” executes the end of the seam zone by actuating the
pedal, see Chapter 7.02 Pedal

Actuating the knee switch executes the end of the seam zone by actuating the knee
switch, see Chapter 7.04 knee switch

After calling the function, further inputs for the end of the seam zone can be performed
and erroneous inputs corrected, see Chapter 11.01.05 Seam zone input when pro-
gramming the seam.
A stitch condensation is defi ned when entering the functions for the end of the
seam zone is performed on completion of the seam program entry. Up to 30
stitches are sewn. Risk of injury in the vicinity of the needle.

Defi ne seam or programming end.
When entering, the program the end of a seam (only left or right) is set in the desired
seam zone.
Analogous to the end of the program, the seam end is set when entering the right and
left seam. The seam end is set in the fi rst seam and the program end is set in the sec-
ond seam.

Conclude the input.

End input and change to the input of the basic settings.

End the input and change to programmed sewing.