Pfaff 3811-15/65, Инструкция по эксплуатации, Страница: 35 / 138

Sewing
35
10 Sewing
In sewing mode, all settings relevant to the sewing process are shown on the display and
can be altered there directly using the corresponding function.
In the sewing mode a difference must be made between manual sewing, sewing with fi xed
programs and programmed sewing.
The selection is made by selecting the corresponding program number:
0 : Manual sewing
1 and 2 : Sewing with fi xed programs
3 to 49 : Programmed sewing
(with up to 15 seam zones for left and right seams)
10
.01
Manual sewing
In manual sewing, the values for the width and the target stitching position are displayed on
the control panel during sewing and can be changed directly by means of the corresponding
function, such as the functions at the seam end, the material type as well as the needle and
foot positions.

Switch on the machine and select the program number " 0" , see Chapter 9.04 Selecting
program number
Description of the functions
Program selection
Opens the menu for inputting the program number, see chapter 9.04 Selecting a program
number.
Input mode
Quit the sewing mode and call up the input mode.
Fullness
Changes the value for the fullness, see Chapter 9.05 Input fullness.
Material type
The functions are used to select the material type, see Chapter 10.01.02 Selecting the ma-
terial type.
Needle raised
Positions the needle in the top position.