Pfaff 3811-15/65, Инструкция по эксплуатации, Страница: 123 / 138

Adjustment
123
13
.11
Error message explanations
Message Description
E 001 System error
E 002 Sewing motor E 002 /BB/xxx
BB = 20 : Deadman
02 : Position forwards
03 : Position in reverse
05 : Position by shortest route
09 : Write parameters
10 : Speed
0 A: Reset stitch counter
0 B: Stop after xxx stitches
30 : Timeout for increasing speed
31 : Timeout from uncertain positioning
32 : Timeout from deadman command
33 : Timeout for deleting errors
34 : Timeout for emergency stop
35 : Timeout for writing parameters
36 : Timeout for resetting stitch counter
37 : Timeout for stop command after x stitches
38 : Timeout for initialisation
xxx = Sewing motor controller error byte (see Chapter 13.08 Sewing motor error)
E 003 Section
E 004 Section end
E 005 Pedal activated when machine turned on
E 006 Rapid job keypad (CAN)
E 007 Ramp end
E 008 Reference for the fullness setting not found
1: when moving to the sensor
2: when moving from the sensor
E 009 Tape feed
1 : Tape distance too large when regulating
2 : Threading terminated after 2 attempts
E 010 Hook knife
E 011 Stepping motor step frequency too high
E 012 Free
E 013 Error from the Docu-seam system
E014 Incorrect program number
E 015 Incorrect sewing range number
E 016 Memory full
E 017 Free
E 018 Free
E 019 External control interface
E 020 Free
E 021 Power supply overloaded ( 24 V)
E 022 Mains voltage
E 023 Power supply 24 V too low
E 024 Error on the CAN interface