Pfaff 3588-05/020 Скачать руководство пользователя страница 8

Страница: 8 / 190

Safety

.03

Safety symbols

Danger!

Special points to observe.

Danger of injury to operating or technical staff!

Caution

Do not operate without fi nger guard and safety de-

vices.

Before threading, changing bobbin and needle, cleaning

etc.

switch off main switch

.04

Important notes for the user

●

This instruction manual belongs to the equipment of the machine and must be available

to the operating staff at all times.

●

This instruction manual must be read before the machine is operated for the fi rst time.

●

Both operating and technical staff must be instructed on the safety devices of the mach-

ine and on safe working methods.

●

It is the duty of the user to operate the machine in perfect running order only.

●

The user must ensure that none of the safety devices are removed nor put out of work-

ing order.

●

The user must ensure that only authorized persons operate and work on the machine.

For further information please refer to your PFAFF agency..

Содержание 3588-05/020































































































































































































Результаты поиска

Содержание 3588-05/020

Отзывы:

Pfaff 3588-05/020, Инструкция по эксплуатации, Страница: 8 / 190

Результаты поиска

Содержание 3588-05/020

Отзывы: