Pfaff 3588-05/020 Скачать руководство пользователя страница 54

Страница: 54 / 190

Input

Description of the functions

Conclude input

This function is used to conclude the input, and the machines changes to the sewing mode.

Seam program input

This function is used to call up the menu for entering or editing seam programs, see Chapter

Creating / editing seam programs

Program management

This function is used to manage the data from the machine memory and CD-Card, see

Chapter

Program management

Parameter settings

This function is used to call up the menu for altering parameter settings, see Chapter

13.10

Parameter settings

11 Input

In addition to the functions for entering or editing seam programs, in the input mode there

are functions for displaying information, for program management, for machine confi gurati-

on and settings (country settings and rights of access ), as well as for supporting service and

adjustment work.

In the input mode the machine start function is blocked to avoid an unintentional start-up of

the machine.

.01

Overview of the functions in the input mode

●

Switch on the machine.

●

Call up the input mode.

Содержание 3588-05/020































































































































































































Результаты поиска

Содержание 3588-05/020

Отзывы:

Pfaff 3588-05/020, Инструкция по эксплуатации, Страница: 54 / 190

Результаты поиска

Содержание 3588-05/020

Отзывы: