Pfaff 3588-05/020 Скачать руководство пользователя страница 50

Страница: 50 / 190

Sewing

Daily piece counter

Here the day number of pieces is indicated.

Automatic / manual sewing

This function is used to switch between automatic and manual sewing. The appropriate sym-

bol of the current operating mode is shown respectively.

Bobbin thread stitch counter

This function opens the menu for entering and resetting the number of stitches for the bob-

bin thread, see Chapter

Setting the bobbin thread stitch counter

Jig up/down

This function is used to raise or lower the jig.

Sewing foot up/down

This function is used to raise or lower the sewing foot. In addition the thread trapper is ope-

ned or closed.

Stand height adjustment

This function opens a menu for adjusting the stand height (only when the machine is in its

basic position).

Bobbin change

This function makes it possible to change the bobbin.

Stacker up/down

This function is used to open or close the stacker.

Sewing start

This function is used to start the sewing operation.

Basic position

This function is used to move the machine to the basic position.

Tacting backwards

This function is used to move backwards in sections in the seam pattern tact for tact. The

seam cycle is sewn automatically, if the function is pressed longer.

Tacting forwards

This function is used to move forwards in sections in the seam pattern tact for tact. The

seam cycle is sewn automatically, if the function is pressed longer.

Single step (after pressing the double start keys)

This function is used to move the folder and jig feed tact for tact.

Содержание 3588-05/020































































































































































































Результаты поиска

Содержание 3588-05/020

Отзывы:

Pfaff 3588-05/020, Инструкция по эксплуатации, Страница: 50 / 190

Результаты поиска

Содержание 3588-05/020

Отзывы: