manualshive.com logo in svg

Pfaff 3588-05/020, Инструкция по эксплуатации, Страница: 79 / 190

Поделиться
Скачать
Pfaff 3588-05/020 Скачать руководство пользователя страница 79

 

 

Input

 

79

11

.05 

Rights of access

The functions, which can be selected on the control panel, are ordered by code numbers 

and can be protected from unauthorized access. For this purpose the control unit differen-

tiates between three user groups (User 

1

, 

2

 and 

3

), which are all assigned a corresponding 

PIN. If a function is selected, to which the user does not have access, the user is requested 

to enter a PIN. After the corresponding PIN has been entered, the selected function is exe-

cuted. In addition to the 

3

 user groups, the control unit also recognises the so-called "super 

user". The super user is equipped with a key switch and has access to all functions, and is 

also authorised to defi ne the rights of access.

 

●

Insert the key switch and switch on the machine.

 

●

Call up the input mode.

 

●

Call up the menu for entering rights of access.

Description of the functions

Input mode

This function is used to change from the initial state to the input mode.

Conclude input

This function is used to conclude the input and change to the sewing mode.

Enter PIN

With this function it is possible to defi ne an individual PIN for each user.

Function selection

This function is used to select the code number for the functions to be blocked or authori-

sed.

Locking/releasing 

These functions are used to lock or release the function for the appropriate user.

Содержание 3588-05/020































































































































































































Отзывы:

Нет отзывов