Pfaff 3588-05/020, Инструкция по эксплуатации, Страница: 160 / 190

Control unit
160
14
.02.03
Stitch generation error
Display Description
1 Incorrect machine identifi cation
2 Section "jig type"
or section "obstacle" missing
or on wrong place
3 Increment too large
4 Program end without thread trimming
5 Impermissible stitch length data
6 Incorrect element in geometrical data set
7 Quick motion although machine is sewing
8 Impermissible stitch length data
9 Impermissible stitch length data
10 Circle check-point = circle end point
11 Division by zero
12 Impermissible stitch length data
13 No coordinates section before curve check-point
14 Sewing area limit exceeded
15
Curve without end point
16
Mach. function buffer overfl ow
17
Start sewing command in loading point program
18 Incorrect curve check-point
19 Incorrect curve check-point
20 Incorrect curve check-point
21 Incorrect curve check-point
22 Stitch length not initialised
23 Loading point program not ended
24
Stitch width command in loading point program
25
Impermissible value for section stitch direction
26
Cutting command, although thread cut
27
Start sewing command, although machine sewing
28 Cutting command in sewing-off-area
29 Sewing-off command, although thread cut
30 Cutting command directly after start sewing command
31 Start bartack too long