manualshive.com logo in svg

Pfaff 3588-05/020, Инструкция по эксплуатации, Страница: 60 / 190

Поделиться
Скачать
Pfaff 3588-05/020 Скачать руководство пользователя страница 60

Input

60

11

.02.02 

Image functions

 

●

Switch on the machine. 

 

●

Call up the input mode.

 

●

Call up the seam program input function.

 

●

Call up image functions.

Description of the functions

Conclude input

This function is used to conclude the input, and the machine changes into the sewing mode.

Enlargement factor X-axis

This function is used to enlarge or reduce the image in the X-direction. The operation is con-

cluded by selecting the point of symmetry either with the number keys or with the control 

keys.

Enlargement factor Y-axis

This function is used to enlarge or reduce the image in the Y-direction. The operation is con-

cluded by selecting the point of symmetry either with the number keys or with the control 

keys.

Mirror

This function is used to mirror the image. The operation is concluded by selecting the point 

of symmetry either with the number keys or with the control keys.

Turn

This function is used to turn the image. The image is turned in an anti-clockwise direction. 

The operation is concluded by selecting the point of symmetry either with the number keys 

or with the control keys.

Shift image

After this function has been selected, a new point must be approached with the jig drive. 

With the enter function, this point is taken over and the image is shifted from the current po-

sition to the end of the program.

Содержание 3588-05/020































































































































































































Отзывы:

Нет отзывов