Pfaff 3588-05/020 Скачать руководство пользователя страница 57

Страница: 57 / 190

Input

Conclude input

This function is used to conclude the input, and the machine changes into the sewing mode.

Mark block start

This function is used to defi ne the start of a block, see Chapter

Block functions.

Mark block end

This function is used to defi ne the end of a block, see Chapter

Block functions

This function opens a menu for entering block functions, see Chapter

Block func-

tions.

Image functions

This function opens a menu for entering image functions, see Chapter

Image func-

tions.

Coordinate reference points

This function is used to set the coordinates on the display at "

", in this way creating a new

reference point.

Edit

After selecting this function, the current section can be edited.

Insert

This function is used to insert functions or blocks, see Chapter

Inserting functions

Delete

This function is used to delete the current section.

Sewing foot up/down

This function is used to raise or lower the sewing foot. In addition the thread trapper is ope-

ned or closed.

With this function the sewing head is raised and the carriage can be moved near the desired

seam pattern point with appropriate direction symbols. After the position has been confi r-

med, the machine moves towards the nearest point of the seam pattern.

Tacting forwards

This function is used to move forwards in sections in the seam pattern tact for tact. The

seam cycle is sewn automatically, if the function is pressed longer.

Tacting backwards

This function is used to move backwards in sections in the seam pattern tact for tact. The

seam cycle is sewn automatically, if the function is pressed longer.

Содержание 3588-05/020































































































































































































Результаты поиска

Содержание 3588-05/020

Отзывы:

Pfaff 3588-05/020, Инструкция по эксплуатации, Страница: 57 / 190

Результаты поиска

Содержание 3588-05/020

Отзывы: