Pfaff 3588-04/020, Инструкция по эксплуатации, Страница: 82 / 196

Input mode functions
11 - 32
1 2 3 4 5 6 7 9 0
Enter
8
Esc
Clear
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 46
PROGRAM NUMBER : 4034
[ PERMISSIBLE 0 - 9999 ]
●
Enter the desired program number via the number keys (e. g. 500 for a seam program to
be created)
●
Confirm by pressing Enter .
Fig. 11 - 47
X: 2500 Y: 0 1 : PROGRAM NUMBER
# 500
●
Move step by step through the program header over the section „Obstructions“ with the
number keys 1 or 2, until you find the display where you can input the jig code (in this
case, „obstructions“ means that additional devices have been attached to the sewing jig,
e.g. a variable sewing slot).
0
Enter
1 2 3 4 5 6 7 9 0
Enter
8
Esc
Clear
5 0
Fig. 11 - 48
X: 2500 Y: 0 2 : JIG CODE
●
Select the Change function to change the setting for the jig code (number key 9).
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 49
●
Press number key 1 to switch the jig code on.
●
Press right arrow key to be able to enter the jig-code number.
(The cursor jumps to CODE: __.)
●
Enter the jig-code number via the number keys (e. g. 99).
●
Confirm by pressing Enter .
1
JIG CODE : OFF CODE: _ _
0- OFF
1- ON
Enter
9 9