Pfaff 3588-04/020, Инструкция по эксплуатации, Страница: 33 / 196

Preparation
9 - 2
9
.02
Winding the bobbin thread / adjusting the thread tension
-
+
5
3
1
2
4
●
Place an empty bobbin 1 onto shaft 2 .
●
Thread the bobbin in accordance with Fig. 9-02 and wind it clockwise around bobbin 1 a
few times.
●
Cut thread end using thread cutter 3 .
●
Switch on the bobbin winder by pressing the spindle 2 and cam 4 simultaneously.
The bobbin 1 fills up while you are sewing.
●
The thread tension on bobbin 1 can be adjusted with screw 5 .
●
The bobbin winder stops automatically when bobbin 1 is full.
To adjust the filling amount, see chapter 13.05.22 Bobbin winder .
If the thread is wound unevenly:
●
Loosen nut 6 .
●
Turn thread guide 7 accordingly.
●
Tighten nut 6 .
Fig. 9 - 02
7
6