Pfaff 3588-04/020, Инструкция по эксплуатации, Страница: 111 / 196

Adjustment
13 - 12
5
1
2
2
Fig. 13 - 10
●
Position the hook point at the center of the needle and move the hook bearing according to
requirement 1 . Make sure that the needle is not pressed against by the needle guard 4 .
●
Tighten screws 2 .
●
Taking the backlash of the toothed gear into account, tighten the fastening screws of the
bevel gear 1 .
●
If required, move the needle bar (screw 5 ) without twisting it according to
requirement 2 .
●
Turn eccentric 6 (screw 7 ) according to requirement 3 .
●
Insert bobbin case and screw on hook gib.
1.0 mm
0.05 - 0.1 mm
4
7
6