Pfaff 3588-04/020, Инструкция по эксплуатации, Страница: 38 / 196

9 - 7
Preparation
9
.07
Automatic change in program station
If you want to change back and forth between two seam programs, a program
must be stored in each of both program stations (see chapter 9.06 Selecting a
seam program ).
●
Select the INPUT mode by pressing the respective key.
Depending on the setting and configuration of the machine the displayed status
bar may differ from the following example.
Fig. 9 - 08
●
Activate the Automatic change in program station function (number key 4).
●
Select the program station with which you would like to start (number keys 1 or 2).
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
or