Pfaff 3588-04/020, Инструкция по эксплуатации, Страница: 55 / 196

11 - 5
Input mode functions
1 2 3 4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 05
1 - WRITE MACHINE DATA ON DISK
2 - READ MACHINE DATA FROM DISK
3 - CARRY OUT COLD START
4 - DISPLAY SOFTWARE STATUS
5 - CONTRAST SETTING OF DISPLAY
6 - CHANGE CODE NUMBER
●
Select the CONTRAST SETTING OF DISPLAY function (number key 5).
●
If required, enter the 4-digit code number via the number keys .
5
INPUT mode
Input menu function (number key 0)
1 - PROGRAM MANAGEMENT ....
2 - CREATE / MODIFY PROGRAM
3 - COUNTER ....
4 - SWITCH FUNCTIONS ....
5 - TIMES ....
6 - SERVICE
2 - STEPPING MOTOR FUNCTIONS ....
4 - DISPLAY INPUTS / OUTPUTS
1 - SEWING DRIVE FUNCTIONS ....
6 - CONFIGURE MACHINE ....
7 - OTHER FUNCTIONS
3 - SWITCH OUTPUTS
5 - ADJUST ZERO POINT ....
2 - READ MACHINE DATA FROM DISK
4 - DISPLAY SOFTWARE STATUS
6 - CHANGE CODE NUMBER
5 - CONTRAST SETTING OF DISPLAY
6
7
5
0
3 - CARRY OUT COLD START
1 2
3
4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 06
CONTRAST SETTING:
ADJUST WITH +,- KEYS
The contrast setting changes when the plus/minus keys are pressed and does
not have to be confirmed with Enter. Do not lower the contrast setting to the
extent that the display cannot be read anymore!
●
Change the contrast setting as desired by pressing the plus/minus keys .
●
Press Enter to exit the function. Enter
Summary of the function selections
1 - WRITE MACHINE DATA ON DISK