Pfaff 3588-04/020, Инструкция по эксплуатации, Страница: 69 / 196

11 - 19
Input mode functions
SWITCH OUTPUTS
Sets and resets outputs (see chapter 14.03.03 Tables of outputs )
DISPLAY INPUTS / OUTPUTS
After this function has been selected, the states of the inputs and outputs are
displayed: 1 = Input actuated / output switched
0 = Input not actuated / Output not switched
Use the arrow keys to toggle between the input and output display.
For an input and output table please refer to chapter 14.03.04 Tables
of inputs .
ADJUST ZERO POINT
Opens a menu where you can adjust different zero points (see chapter 8.07
Adjusting zero point ):
3
4
5
1 2 3 4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 32
1 - GAUGE POSITION
2 - NEEDLE POSITION
3 - FOLDER POSITION
GAUGE POSITION
Sets the basic position of the linkage based on the carriage’s proximity
switches using the zero point gauge.
NEEDLE POSITION
Adjusts the needle’s zero point based on the gauge position. Simultaneously
the machine’s zero point is also adjusted, which lies 250 mm from the
needle’s zero point in the direction of the folder station.
FOLDER POSITION
Adjusts the folder position.
CONFIGURE MACHINE
Opens a menu which shows you which optional features the machine is equipped
with:
1
2
3
1 2 3 4 5 6 7 9 0
Enter
8
Esc
Clear
Fig. 11 - 33
1 - TILTABLE HEAD: NO
2 - VERTICAL HOOK: YES
3 - JIG MONITOR: YES
4 - LABEL FEED: NO
5 - FLAP FEED: YES
When commissioning the machine, or when equipping it with additional devices,
the settings must be entered or changed accordingly.
6