Pfaff 3568-12/22, Инструкция по эксплуатации, Страница: 70 / 142

Adjustment
13 - 1
13 Adjustment
Before beginning any adjustment work, observe all relevant safety regulations!
13
.01
Notes on adjustments
All adjustments in these adjustment instructions are based on a completely assembled
machine. Covers on the machine which have to be removed for checks and adjustment
work and later remounted are not mentioned. The screws or nuts in () are for securing
machine parts and must be loosened before the adjustment and retightened after all
adjustments are carried out.
13
.02
Tools, gauges and other accessories
●
1 set of screwdrivers with blade widths from 2 to 10 mm
●
1 set of wrenches with jaw widths from 6 to 22 mm
●
1 set of Allan keys from 1.5 to 6 mm
●
1 universal screwdriver with interchangeable blades
●
1 adjustable wrench
●
1 250g hammer
●
1 circlip pliers for circlips (Seeger circlip ring pliers)
●
1 pair of tweezers (slanted)
●
1 metal rule (0.3 mm thick)
●
1 brass arbor ( 8 mm dia., 250 mm in length)
●
1 adjustment pin (5 mm diameter), Part No. 13-030 341-05
●
1 hook bearing adjustment gauge, Part No. 91-129 996-01
●
1 adjustment pin (zero point adjustment)
●
1 edge guide (800 - 1000 mm in length)
●
1 bottle of Loctite
●
Sewing thread and test material
13
.03
Abbreviations
TDC = top dead center
BDC = bottom dead center