Pfaff 3568-12/22, Инструкция по эксплуатации, Страница: 41 / 142

10 - 9
Preparation
10
.07
Jig monitor ( optional )
To make it possible to monitor the jig, the sewing jig is given a code using magnets which
the control can recognize via an additional device.
This is a means of preventing pairing a sewing program with the wrong sewing jig which
could cause the needle to break.
If you want to monitor the jig, the function must be active in the menu, and a jig code must
be entered in the sewing program.
10
.07.01
Activating jig monitor (menu)
●
Select the
INPUT
mode.
Display: "CHOOSE FUNCTION OR SCROLL #250"
●
Via the
plus/minus keys
, scroll through the functions until you find display:
Display: "-2. MENU #261"
●
Call up the 2nd menu level by pressing
Enter
.
Display: "2. MENU #300"
●
Press
number key 4
.
Display: "SWITCH FUNCTIONS #560"
●
Press
number key 4
again.
Display: "OTHER FUNCTIONS #660"
●
Press
number key 3
.
Display: "JIG MONITOR OFF (ON:1) #675"
●
Press
number key 1
.
Display: "JIG MONITOR ON (OFF:0)#676"
●
Press
Enter
key.
Display: "-2. MENU #261"
070
4 - SWITCH FUNCTIONS 1 - THREAD MONITOR FUNCTIONS
2 - LANGUAGES
3 - AIRBLAST SELECTION
4 -
OTHER FUNCTIONS
3 - BOBBIN SENSOR
1 - GERMAN
2 - ENGLISH
3 - FRENCH
4 - SPANISH
5 - ITALIAN
5 - AUX. FEED, SEWING
1 - THREAD PULLER
2 - BOBBIN CHANGE FROM TOP
3 -
JIG MONITOR
3 - AUX. FEED, FEED FORWARD
1 -
NEEDLE COOLING (AIRBLAST), FEED FORWARD
1 - THREAD MONITOR
2 - BOBBIN MONITOR
2 - NEEDLE COOLING (AIRBLAST), STACKER
4 - AUX. FEED, STACKER
4 - LABEL FEEDER
5 - LABEL ALTERNATELY
6 - CARRIAGE MOVEMENT
7 - SLOW TRIGGERING
8 - BAS. FRONTPOS. POCKET-PLATE