Pfaff 3568-12/22, Инструкция по эксплуатации, Страница: 115 / 142

Adjustment
13 - 44
13
.08.03
Feed changeover
Requirement
1. The jig frame must just touch the sewing changeover and be both parallel and
horizontal.
2. On the folding station, the sewing jig must be positioned parallel to the pocket plate
and/or to the table.
3. When the jig changes over, the jig frame must not move.
Fig. 13 - 42
●
Move eccentric pin
1
(nut
2
) according ot the
requirements 1
and
2
.
●
Repeat this work step until both adjustments are correct.
●
Align jig frames (screws
3
and
4
) horizontally.
●
Adjust carrier
5
(screws
6
) according to
requirement 3
, making sure that the home
position of the transport arm does not change (see
chapter 13.08.02 Home position of
the transport arm
).
4
5
3 3
4
1
2
6
6
6