Pfaff 3568-12/22 Скачать руководство пользователя страница 11

Страница: 11 / 142

1 - 5

Safety

.06

Danger

A working area of

1 meter

is to be kept free both in front of and behind the

machine while it is in operation, so that it is always easily accessible.

Never reach into the sewing area while sewing!

Danger of injury by the needle!

Never leave objects on the table or in the needle plate area while adjusting the

machine settings! Objects can become trapped or be slung away!

Danger of injury!

Fig. 1 - 01

Überw.
Bügel

AUS

EIN

S 98.1

Before operating the machine, make sure that safety switch

in the control box

is switched on. Do not operate the machine under any circumstances if the

safety switch

has been turned off! Danger of injury!

The machine must not be operated without safety bar

Danger of injury by the transport arm when it is swinging back and forth!

The machine must only be operated with the cover

closed!

Danger of injury by the moving parts of the XY control!

The machine must not be operated without the sewing head’s protective

devices such as the take-up lever guard and the belt guard!

Danger of injury by the movement of the take-up lever or by the rotating V-belt!

Содержание 3568-12/22















































































































































Результаты поиска

Содержание 3568-12/22

Отзывы:

Pfaff 3568-12/22, Инструкция по эксплуатации, Страница: 11 / 142

Результаты поиска

Содержание 3568-12/22

Отзывы: