Pfaff 3568-12/22, Инструкция по эксплуатации, Страница: 129 / 142

Adjustment
13 - 58
13
.08.16
Position of folder plate
Requirement
1. The front edge of the folder plate
2
must be parallel to the die
4
.
2. The exiting folder plates
2
must be positioned on all sides approx.
0.1 mm
under the
lower edge of the angular strips of the die
4
.
Fig. 13 - 55
●
Turn off compressed air and unscrew compressed air connection of the folder unit.
●
Unscrew screw
1
and remove the entire folder unit.
●
Align folder plate
2
according to
requirement 1
(screws
3
).
●
Insert folder plate
2
and adjust distance to die
4
according to
requirement 2
(screws
5
).
●
Position the folder plates of the following switching positions correspondingly under the
previous folder plate to be entered (see
chapter 13.08.17 Actuating sequence of the
folder plates
).
●
Mount the folder unit (observe the aligning pins) and tighten screws
1
.
●
Screw on compressed air connection and turn on compressed air.
1
2
4
0.1 mm
4
3
3
3
3
5
5
5
5
5
5
2
2