Pfaff 3568-12/22, Инструкция по эксплуатации, Страница: 32 / 142

Mounting and commissioning the machine
Fig. 9 - 07
9 - 5
Fig. 9 - 06
2
●
Insert adjustment pin
2
into the hole in the X/Y control. Move X/Y carriage with the
number keys "
4
", "
6
", "
2
" and "
8
" in such a way that the end of adjustment pin
2
falls
easily into the
back
hole of the zero point gauge
1
. (see
Fig. 9-06
).
●
Remove adjustment pin
2
.
●
Press
Enter
.
Display: "SERVICE #800"
●
Select
MANUAL
mode to bring the X/Y control to home position.
●
Press
transport arm/sewing jig
to swing the transport arm to the sewing station.
●
Press
home position
key twice.
●
Insert adjustment pin
2
into the hole in the X/Y control (see
Fig. 9-07
).
●
The end of the adjustment pin
2
must now easily fall into the
front
hole of the zero point
gauge
1
. If this is not the case, the switch vanes of the X/Y carriage must be adjusted
(see
chapter 13.08.01 Adjusting the switch vanes on the X/Y control
).
●
Remove zero point jig
1
.
2
1