English
Ratchet lever hoist SILVERLINE
F 03.01.051
subject to change
page 8
The ratchet lever hoist
Be sure not to exceed the load capacity listed in the "Technical data".
Arrange for a specialist to check the ratchet lever hoist before using it for the first time.
Each time before using the ratchet lever hoist, check:
Ö
the operation of the brake
Ö
the condition of the chain and the load hook (visual inspection)
Load lifting tackle
If additional load lifting tackle is used, make sure its load capacity is
sufficient for the job.
Load hooks must have a safety clasp.
Fasten the load correctly.
Do not use the chain as slinging tackle.
Hang the load from the hook in central position only.
Arrange at least once a year for a specialist to carry out tests in accordance with the accident prevention
regulations.
Be sure to carry out inspection and maintenance jobs in the intervals specified.
Use only original accessories and replacement parts or the equipment's safe operation will not be
guaranteed.
Technical data
Type
030834052 030834053 030834054 030834055
030834062 030834063 030834064 030834065
Lifting capacity
kg
750 1500 3000 6000
Chain DIN 5684 / Quality class 8-
EN 818-7 / Quality classT
6,0x18 8,0x24 10x30 10x30
Chain strands
1 1 1 2
Standard travel
m
1,5 1,5 1,5 1,5
Lever pressure under full load
kg
14 24 32 34
Travel per full hand wheel rotation
mm
19,7 21,3 16,8 8,4
Minimum load *
daN
30 45 90 180
Weight
kg
7,2 11,5 21,0 31,0
Suitable for ambient temperature
–10 Grad C + 50 Grad C
*) The ratchet lever hoist has to be loaded with a minimum load (see "Technical data") in order to
guarantee the reliable operation of the load pressure brake.
Description of functions
Ratchet lever hoists are hoists with a spur-gear unit. The lifting medium is a high-strength round link chain.
The load is safely held in each position by a built-in load pressure brake.
Lifting and lowering are performed by making ratchet movements with the lever.
In the unloaded state the chain can be released, allowing it to be pulled through the hoist by hand (see page 9
“Chain release”).
The load pressure brake is activated automatically as soon as the minimum load is applied.
