PESA VIDBLOX 3G-NE RX, Руководство пользователя

Страница: 41 / 57

V
IDBLOX
3G-SL
AND
3G-NE RX M
ODULE
Publication 81-9059-0667-0, Rev. C
March 2011
Proprietary Information of PESA 4-22
•
IP Configuration (3G-SL Only)
Selections made and data entered through the IP Configuration fields allow you to determine
whether the module obtains its IP address automatically through the facility dynamic host
configuration protocol (DHCP) server, if available, or uses a static IP address that you manually
enter and assign through the menu screen.
DHCP –These radio buttons toggle the DHCP function of the Vidblox RX module on and off.
-
On – Default Selection: With DHCP On selected, Vidblox automatically receives its
network IP address from the DHCP server for the facility – if available. When DHCP is
active, the Static IP Information fields are shown inactive with a muted foreground, as
shown by the left-hand illustration in Figure 4-12.
-
Off – With DHCP Off selected, the Static IP Information fields are shown active with bold
characters, as shown by the right-hand illustration in Figure 4-12. Network operating
parameters for the RX module are obtained from data entered in these fields.
Figure 4-12 IP Configuration Menu
Selecting DHCP Mode
Normal default mode for Vidblox is DHCP On and when connected to a network with a DHCP
server, the module should automatically obtain an IP address and begin communicating over the
selected network subnet. When DHCP is active, IP address obtained through the DHCP process and
other current network parameters are displayed as inactive fields in the Device Properties window
as shown by the left-hand illustration in Figure 4-13.