PESA VIDBLOX 3G-NE RX, Руководство пользователя

Страница: 38 / 57

V
IDBLOX
3G-SL
AND
3G-NE RX M
ODULE
Publication 81-9059-0667-0, Rev. C
March 2011
Proprietary Information of PESA 4-19
If input SDI signal to RX module is derived from a Vidblox TX module, the
embedded auxiliary data packet contains handshake data between the TX and
RX modules that identifies type (DVI or analog) of source input signal to the TX
module at the origination point. When this data is read by the receiver module, a
handshake protocol allows the Auto Display Output Type option to
automatically set the output type from the RX module to the same type as the
input signal at the origination point.
If your installation has different input and output video types, you may have to
manually select the output type rather than using the Auto option. For example
if you have a configuration with a VGA input to a Vidblox TX module and a
DVI display device connected to the output of the RX module, you must
manually select DVI as the output type.
•
Analog Output Format (3G-SL Only)
Analog O/P Type enables automatic selection, or allows manual selection of format of analog
video output signal from the RX module. To change selection, click radio button
corresponding to desired format selection from the following options:
-
Auto – Auto is the default selection. When the SDI input signal to the RX module is
derived from a Vidblox TX module with an analog input signal, Auto mode sets the format
of the analog output signal the same as the input signal to the transmitter.
-
VGA – Manually selects the format of the outgoing analog video as a VGA (RGBHV)
source.
-
SOG* – Manually selects the format of the outgoing analog video as a component analog
“sync on green” signal.
-
RGBS* - Manually selects the format of the outgoing analog video as a RGB component
analog signal with a separate composite sync signal.
Output Color identifies color space of outgoing analog video signal. To change selection, click
radio button corresponding to desired color space format from the following options:
-
Auto – Auto is the default selection. When the SDI input signal to the RX module is
derived from a Vidblox TX module with an analog input signal, Auto mode sets the color
space of the analog output signal the same as the input signal to the transmitter.
-
RGB* – Manually selects outgoing video as a component analog signal using the RGB
color space.
-
YPbPr* – Manually selects outgoing video as a component analog signal using the YPbPr
color space.
*3G-SL RX Module Only